Compact and Energy-Efficient Powerhouse
Wallas 2000 t is a forced air kerosene boat heater with no exposed flame designed to replace older 1800 t and 2400 t models. With its improved temperature control features and low power consumption, it is a great choice for smaller boats even for icy cold conditions.
Keeping the focus on low energy consumption, Wallas-Marin engineered 2000 t to run with only 0.4-0.7 amps and 0.10-0.20 liters per hour. It comes with an easy-to-use thermostatic control panel, which can be set to maintain a target temperature or used in Manual Mode with two powers levels – full power at 2000 W or half power at 900 W.
Double inlet pipes ensure ample fresh airflow in cabin.
Exhaust gas is safely expelled outside keeping the indoor air clean and odorless.
Fully enclosed laminar burning process ensures a quiet sound level and dries the indoor air.
Extremely low power consumption.
Durable Finnish design and manufacturing keep your heater running through tough weather conditions.
Reliable choice even for icy cold conditions.
Ensure everyone’s safety with a heater that has low temperature on unit and exhaust pipe.
Have better comfort control with an easy-to-use thermostatic control panel.
Enjoy your conversations with a quiet heater.
HEATING
POWER
FUEL
CONSUMPTION
ELECTRICITY
CONSUMPTION
TECHNICAL SPECIFICATIONS
Fuel: Kerosene/paraffin
Power: 900-2000 W (3,000-6,800 BTU)
Operating Voltage: 12 V
Fuel Consumption: 0,10-0,20 l/h (4.4-6.8 oz/h)
Electricity Consumption: 0,4-0,7 A
Air Volume at min Heat: 46 m3/h (27 cfm)
Air Volume at max Heat: 62 m3/h (36 cfm)
Length: 365 mm (14 5/16″)
Width: 126 mm (4 15/16″)
Height: 258 mm (10 5/32″)
Weight: 6,2 kg (13.6 lbs)
Mounting: Floor or wall
RECOMMENDED BUILDS
Boats: 5-7 m (16-22 ft)
Trailers: 5-7 m (16-22 ft)
STANDARD PACKAGE CONTENT
Heater
Thermostatic Control Panel, wire 6 m (19 ft)
Fuel line 1,5 m (5 ft)
Separate tank feed
Power cable 4 m (13 ft) and integrated fuse 15 A
Mounting plate
Accessory bag including essential clamps and screws
The 4430 Remote Control is an additional accessory
MATERIALS
Stainless Steel, High-Grade Aluminum, Other Corrosion-Resistant Materials
Technical values are measured in a reference measurement wall, which is constructed to represent a typical boat installation. Values have been measured with maximum length of ducting, exhaust pipe, fuel line, and power cord. Figures allow for 10% reserve – yours may vary.
Accessories in black are included in the standard package. Accessories in blue are additional.
Browse product manuals, spec sheets and more in the Documents Center
Do you currently have an older Wallas?
2000 t’s outside dimensions, controls, and connectivity are the same as in the older 2400 t model, which makes it easy to swap units.
Reach out to your distributor to learn how to upgrade to a newer more efficient model and save money.
